Millennium Trail Prince Edward County: 3 Cycling Routes
The Millennium Trail, Prince Edward County’s former rail corridor, runs for 46 kilometres. For a first ride while Wellington construction is ongoing, start at Station Road in Hillier and head toward Consecon. Save the routes from West Street in Wellington for when the County confirms the local section has reopened. You can have a good trail day without covering the whole route.
Choose a Millennium Trail route
| Route | Start | How to plan it |
|---|---|---|
| Short first ride | West Street, Wellington, once reopened | Ride 20–30 minutes toward Bloomfield, then turn back |
| Two villages | Wellington to Bloomfield, once reopened | Use the trail to Stanley Street and allow time for a village stop |
| Quiet countryside | Station Road, Hillier | Ride toward Consecon and turn back at the time you chose |
Wellington construction update, November 2026: Local reporting on October 29 put the reopening of the Wharf Street to Consecon Street section in early December, with intermittent work possible after that. Use the County’s construction update and the latest local reporting before you set out. Until the route is confirmed open, choose Hillier toward Consecon and obey posted closures.
These are three ways to use the corridor. Use the Millennium Trail map to check each crossing and turn, and budget a little more time than the bike computer estimates. The trail’s fine gravel is generally easier to ride than loose gravel on a rural shoulder, but it still rides differently from pavement. Recent rain, wind and the group’s pace will change the day.
Three cycling routes in Prince Edward County
1. A short Wellington out-and-back
Once the County confirms the Wellington section is open, start at the West Street launch area. Look at the kiosk map before getting on the trail. Follow the trail east toward Bloomfield and set a time to turn around before you leave. Twenty to thirty minutes each way gives a first-time group room to stop, check bike fit or head back if conditions are worse than expected.
Save the longer break for Wellington. It’s easier to enjoy a meal there once you know you’re done riding. Check the route from the launch area to Main Street if you want to continue on foot. If you’re staying in the village, the County lodging guide compares Wellington with Picton and Bloomfield and explains what to check before booking a room around a cycling day.
2. Wellington to Bloomfield and back
After reopening, use the same West Street start and ride east toward the Stanley Street crossing. The local trail association lists Mill Pond Park, 17 Brick Street, about 300 metres from the trail where it crosses Stanley Street. Treat this as a clear waypoint for the village stop, then choose your street route to lunch. Check the café or restaurant for its actual opening hours. The return is the same route in reverse, so keep half your riding time and water for the way back.
For a longer route toward Picton, use the map to decide whether you mean Lake Street or the separate northern end near White Chapel Road. Those two endpoints serve different parts of town. A one-way ride needs a confirmed pickup and a vehicle that can carry the bikes. Build a same-start return unless those arrangements are in place.
3. Hillier toward Consecon
Start at Station Road in Hillier. Ride toward Consecon and use the Salem Road launch area as a mapped waypoint if it fits your pace. The Hillier section crosses a different part of the County from the village-to-village route. You’ll see countryside and wetlands, with fewer places to buy supplies. Bring water and a snack. Pick a turnaround time and keep it even if the outward ride feels easy.
Use this route when a quiet ride matters more than a café halfway along. If the weather turns or your group wants a shorter stop, the County weekend guide’s Picton section offers an alternative with indoor options.
Parking, bike rentals and what to check
Trailheads: The trail association lists launch parking at West Street in Wellington, Station Road in Hillier, Salem Road in Consecon and White Chapel Road near Picton. Match the lot to the route you want. The brochure describes seasonal facilities at launch areas. Pack what you need if a washroom or repair station is unavailable.
Rental: Check Ideal Bike’s rental page for Wellington availability, pickup instructions and current prices. Ask whether the bike is suited to compacted gravel and confirm what is included. If you’re arriving by bus or train, verify how you’ll reach the pickup point, and confirm bicycle policies on each operator separately. The car-free County guide helps plan the first and last legs.
Shared trail: The County parks page and trail association describe shared use. Slow down around walkers and give other users room at crossings. Check current restrictions for e-bikes or motorized use if they apply to your ride. Choose the signed trail crossing and look both ways before joining a road. In winter, check the current conditions and local rules before counting on a ride.
If you have only a weekend, give the bike ride or Sandbanks its own morning. The County weekend itinerary shows how to keep the afternoon free for lunch and a village. The Sandbanks guide covers a different outing with its own park access and permit.
Millennium Trail Prince Edward County FAQs
How long is the Millennium Trail in Prince Edward County?
The former rail corridor is about 46 kilometres end to end. Most first rides work well as a shorter out-and-back from a signed launch area.
Is the Millennium Trail paved?
No. The trail association describes the surface as compacted crushed limestone screenings. Check current conditions after heavy rain.
Where do you park for the Millennium Trail in Wellington?
Use the signed West Street launch area when it and your intended trail section are open. Check the County’s construction notice and follow posted signs.
Can you ride from Wellington to Bloomfield?
Yes. The trail passes close to both villages. Use the map to find the Stanley Street crossing for Bloomfield, and budget enough time to ride back.
What is the best first route with children?
Choose a time-based out-and-back from an open launch area, such as Hillier toward Consecon while Wellington work continues. Turn around before the group is tired and allow for stops and crossings.
About this guide
Edited by Shiva Reddy, Exploring In Canada. Planning details checked November 12, 2026 against operator and municipal information linked above. Times and costs can change. Send us a correction if a detail has changed.
Photo credits
- Main Street, Wellington, Ontario by P199 · CC BY-SA 3.0 · resized and converted to WebP.
- Picton Harbour, Prince Edward County by DXR · CC BY-SA 4.0 · resized and converted to WebP.
- Picton United Church by JFVoll · CC BY-SA 4.0 · resized and converted to WebP.
